|
|
||||
|
For single core, multicore and flat cables.
TSA12E is designed for the processing of insulated and uninsulated single core, multicore and flat cables. The machine counts the batch, measures the cutting length, strips and unjackets without needing to change blades. Through an easy-to-use control panel with a 12-inch color touchscreen display, the operator can constantly overview the work in progress, set and correct batch parameters, and receive batch Information. |
|
TSA12E
|
|
For single core, multicore and flat cables.
TSA15E is designed for the processing of insulated and uninsulated single core, multicore and flat cables. The machine counts the batch, measures the cutting length, strips and unjackets without needing to change blades. Through an easy-to-use control panel with a 12-inch color touchscreen display, the operator can constantly overview the work in progress, set and correct batch parameters, and receive batch information. |
|
TSA15E
|
|
For single core, multicore and flat cables.
TSA25E is designed for the processing of insulated and uninsulated single core, multicore and flat cables. The machine counts the batch, measures the cutting length, strips and unjackets without needing to change blades. Through an easy-to-use control panel with a 12-inch color touchscreen display, the operator can constantly overview the work in progress, set and correct batch parameters, and receive batch information. |
|
TSA25E
|
For cable feeding
AL32/50 is composed of a motorized unit which pulls the cable, while the feed rate is controlled by Unit H; the higher Unit H is elevated, the faster the feed rate. In order to process flat cables wider than the parameters listed on the table (see Technical Characteristics), we can supply a specific Unit H compatible with wider cables. AL32/50 is designed to pull flexible round or flat cables and feed cut / strip machines or cutting machines. |
AL32/50
|
For reeled flexible round and flat cables
MAC600 is designed to dereel flexible round or flat cables and feed cutting machines or cut / strip machines. Continuous cable adjustment is achieved by the H-pulleys through which the cable passes. This system, called Group H, prepares a cable reserve for cut / strip machines and cutting machines, and automatically adjusts the dereeler’s parameters. As more cable is needed, Group H moves closer to Group H1, increasing rotation speed until the processing line is balanced with maximum-sized reels. |
MAC600
|
For reeled flexible round and flat cables
MAC1000 is designed to dereel flexible round or flat cables and feed cutting machines or cut / strip machines. Continuous cable adjustment is achieved by the pulleys through which the cable passes. This system prepares a cable reserve for cut / strip machines and cutting machines, and automatically adjusts the machine’s parameters. The MAC1000 dereeler is independent and dereels the cable only when it is pulled by cut / strip machines or cutting machines. |
MAC1000
|
For coiling flexible cables
RV500 is designed to coil cables and flexible tubes. The machine is easy to move as it is mounted on a structure with swiveling, self-locking wheels. It may be connected to SAMEC cut / strip machines or cutting machines and, with the aid of an encoder and external sensor, it can also function with non-SAMEC machines. RV500 contains a rotating platform with pins which are raised during the coiling process and protected by a plexiglass case. |
RV500
|
For coiling flexible cables
RV800 is designed to coil cables and flexible tubes. The machine is easy to move as it is mounted on a structure with swiveling, self-locking wheels. It may be connected to SAMEC cut / strip machines or cutting machines and, with the aid of an encoder and external sensor, it can also function with non-SAMEC machines. RV800 contains a rotating platform with pins which are raised during the coiling process and protected by a plexiglass case. |
RV800
|
For coiling flexible cables
RV350D is designed to coil cables and flexible tubes. The machine is easy to move as it is mounted on a structure with swiveling, self-locking wheels. It may be connected to SAMEC cut / strip machines or cutting machines and, with the aid of an encoder and external sensor, it can also function with non-SAMEC machines. RV350D contains two rotating platforms with pins which are raised during the coiling process and protected by a plexiglass case. |
RV350D
|
For coiling flexible cables
RV500F or RV500EL are designed for full automation to coil cables and flexible tubes. The machine is easy to move as it is mounted on swiveling, self-locking wheels. It may be connected to SAMEC or other market machines, it has the option of Hellermann Tyton plastic ties or 3 core elastic ties. RV500 contains a rotating platform with pins which are raised during the coiling process and protected by a plexiglass case. |
RV500F
|
